Carver Monaco Roller 25 Cm / For Water Based Lacquers

Carver Monaco Roller 25 Cm / For Water Based Lacquers

• Top of the range varnishing roller suitable for fine lacquer application
• Suitable for applying all types of water based lacquers and sealers
• It will leave a streak free finish & will reduce lacquer absorption
• Highly popular with the floor refinishing and floor sanding industry
• Manufactured from fine quality and durable microfibre fibres, 25 cm
• It can be washed and reused many times, low cost and cost effective
• It is compatible with all professional Roller Handles from Carver & Bona
• Cover more, use less lacquer & work faster with the new Monaco Roller

Carver Monaco Roller 25 Cm / For Water Based Lacquers – Why Monaco

Using professional tools and equipment will enable you to achieve professional results. There is no point spending a lot of money on high traffic floor lacquers if the product is not applied right. Check out the new Carver Monaco Roller 25 Cm / For Water Based Lacquers. This premium quality roller will enable the user to create a streak free finish while applying water based floor lacquers & water based floor sealers. The roller will only release small amounts of sealer at once and due to its high absorbency, it will need refilling less often than most other varnishing rollers. It can be used by highly skilled professionals or by DIY users to achieve professional results.

Carver Monaco Roller 25 Cm / For Water Based Lacquers – Where to use

Use the new Carver Monaco Roller 25 Cm / For Water Based Lacquers to apply all types of water based floor lacquers, water based floor sealers & floor polishes. It can be used for applying new sealers or for recoating old sealers. The roller was designed for the professional floor refinishing market but it can be used by DIY users as well. Achieve top quality results without any training. Cover a larger area, work less and create more durable finishes. The durability of your floor sealer depends on the surface preparation, the type of sealer used and the way it is applied. The new Carver Monaco Roller 25 Cm / For Water Based Lacquers will enable the user to apply enough sealer to fully seal the surface but not too much to prevent the product from drying or achieving its full protection. The same varnishing roller can also be used for applying water based sealers and emulsion paints.

Carver Monaco Roller 25 Cm / For Water Based Lacquers – How to use it

To be able to use the new Carver Monaco Roller 25 Cm / For Water Based Lacquers you will also need a roller handle & some type of handle. Pour some floor lacquer into a special bucket or some kind of varnishing tray, soak the varnishing roller in it and start applying the sealer. Apply a little pressure on the roller at the start and more pressure as you move along. The varnishing roller will release the lacquer in an even and gradual system. From time to time, as the roller seems to dry up, refill it. Roll up and down the fibre of the wood until the surface looks wet but not over soaked. Most water based floor primers should be applied in 1 coat while most water based floor lacquers should be applied in 2-3 coats. For the areas around the edges or all hard to reach areas you should be using a small varnishing brush.

When done with it, wash the roller in running water and dry it up. The new Carver Monaco Roller 25 Cm | For Water Based Lacquers can be used hundreds of times. Check out the amazing range of wood care products from Carver.

Carver Monaco Roller 25 Cm / For Water Based Lacquers